Electrical wiring and rewiring in Dallas
New circuits, partial rewires and replacing damaged runs, done neatly with minimal wall damage.
Short answer: Partial rewiring replaces the wire on specific circuits that are damaged, undersized or outdated, without rewiring the whole house. It is the right call when one area, like a kitchen or an older addition, is the problem.
Not every older house needs a full rewire. Often a few circuits carry the trouble: the original kitchen run that now feeds a microwave and a toaster oven, a bedroom wired with cloth-covered cable, or a garage circuit damaged by rodents.
We trace those circuits, open the fewest walls possible by fishing through attics and crawl spaces, and replace them with properly sized copper and grounded devices. Drywall patches are left ready for paint.
Electrical Wiring & Rewiring: signs to watch for
- One area of the house keeps having problems
- Cloth-covered or rubber-insulated wire in a few rooms
- Overloaded kitchen or laundry circuits
- Rodent or heat damage in the attic
- You are adding circuits for a remodel
How we handle it
- Map circuits and inspect the wire in attic and crawl space
- Plan routes that limit cuts in finished walls
- Pull new copper, replace boxes and devices
- Inspection where required and drywall patches ready for paint
Typical partial rewire, per circuit
Depends on access through the attic or crawl space.
How we choose which circuits to replace
We start with the circuits causing trouble, then look at the ones feeding kitchens, baths, laundry and bedrooms where load and fire risk are highest. Insulation resistance testing tells us which old cables are failing and which are still sound. That lets you spend on the wire that needs it instead of rewiring rooms that are fine.
What moves the price
- Number of circuits replaced
- Attic and crawl space access
- Plaster, tile or paneled walls
Electrical Wiring & Rewiring in Dallas homes
Pier-and-beam houses in Oak Cliff, East Dallas and the Park Cities make partial rewires easier, since we can fish wire up from the crawl space. Slab ranches from the 1950s and 1960s usually get rewired from the attic down, which also means summer work starts early in the morning.
Questions people ask us
How do I know if I need a partial or full rewire?
If problems are limited to a few circuits and the rest of the wire is sound, a partial rewire is enough. We test and inspect before recommending a full rewire.
Will you have to cut my walls?
Some small openings are usually needed. We fish wire through attics and crawl spaces to keep them few and small.
Can I stay in the house during rewiring?
Yes, for partial rewiring. We keep power on to most of the house and restore it at the end of each day.
Related services
Lights out, breaker tripping, or a burning smell?
Call now. A person answers around the clock and we send the nearest NTX electrician who can safely take the job.